Archive for the 'Construction' Category

Click Here To Know More About:

Bluestarcarpentry -Testing the Wood

by

bluestarcarpentry

A water test is the easiest way to ensure that the wood can absorb sealer or finish. Sprinkle water on the deck. If it soaks in immediately, the deck can be sealed. If the water beads up or stands on the deck, your deck may not need sealing yet.

UV rays penetrate wood, which causes graying. Apply a brightener and cleaner to restore the wood’s natural beauty. Deck cleaners help remove dirt, nail stains, algae and mildew. If your deck isn’t brand-new, always use a cleaner before applying finish.

Carefully read the manufacturer’s directions before using the material, and follow all safety precautions and warnings on the label. Wear safety goggles, a long-sleeved shirt and long pants. Don’t wear sandals or open-toed shoes.

Step 1

Remove all deck furniture and other furnishings.

Step 2

Sand splintered areas with a pole sander with 80-grit paper. Repair or replace damaged boards. Make sure to drive in any popped nails first or even better, replace them with deck screws.

Step 3

Sweep off loose debris and clean between the cracks of the boards with a putty knife.

Step 4

Wet surrounding plants and shrubs. Cover them with clear plastic sheeting to prevent spotting with chemicals.

Step 5

Some cleaners require the surface to be damp before applying, while others require the surface to be dry. Consult the product label. For concentrated cleaners, follow the manufacturer’s mixing directions.

Step 6

Use a paint roller with an extension handle, a garden sprayer or a stiff-bristled push broom to apply cleaner to the entire deck. Don’t allow cleaner to puddle in any area.

Step 7

Speed up the process by having one person apply the cleaner and another person back-roll the deck. Back-rolling is a process in which one person uses a roller or broom to spread any puddles.

Step 8

Keep the deck wet with cleaner. Don’t allow the cleaner to dry.

Step 9

Scrub tough areas with a stiff brush or broom. Avoid using wire brushes or brooms. The bristles can break off into the wood and cause rust spots.

Step 10

Allow the cleaner to soak into the wood. Soaking time is usually no more than 10 minutes, but check the product instructions.

Step 11

Rinse the deck thoroughly with a garden hose.

Step 12

Wash equipment with soapy water. Rinse plastic sheeting with water and remove.

Step 13

Allow deck to dry at least two days before applying a sealer.

A water test is the easiest way to ensure that the wood can absorb sealer or finish. Sprinkle water on the deck. If it soaks in immediately, the deck can be sealed. If the water beads up or stands on the deck, your deck may not need sealing yet.

UV rays penetrate wood, which causes graying. Apply a brightener and cleaner to restore the wood’s natural beauty. Deck cleaners help remove dirt, nail stains, algae and mildew. If your deck isn’t brand-new, always use a cleaner before applying finish.

Carefully read the manufacturer’s directions before using the material, and follow all safety precautions and warnings on the label. Wear safety goggles, a long-sleeved shirt and long pants. Don’t wear sandals or open-toed shoes.

Step 1

Remove all deck furniture and other furnishings.

Step 2

Sand splintered areas with a pole sander with 80-grit paper. Repair or replace damaged boards. Make sure to drive in any popped nails first or even better, replace them with deck screws.

Step 3

Sweep off loose debris and clean between the cracks of the boards with a putty knife.

Step 4

Wet surrounding plants and shrubs. Cover them with clear plastic sheeting to prevent spotting with chemicals.

Step 5

Some cleaners require the surface to be damp before applying, while others require the surface to be dry. Consult the product label. For concentrated cleaners, follow the manufacturer’s mixing directions.

Step 6

Use a paint roller with an extension handle, a garden sprayer or a stiff-bristled push broom to apply cleaner to the entire deck. Don’t allow cleaner to puddle in any area.

Step 7

Speed up the process by having one person apply the cleaner and another person back-roll the deck. Back-rolling is a process in which one person uses a roller or broom to spread any puddles.

Step 8

Keep the deck wet with cleaner. Don’t allow the cleaner to dry.

Step 9

Scrub tough areas with a stiff brush or broom. Avoid using wire brushes or brooms. The bristles can break off into the wood and cause rust spots.

Step 10

Allow the cleaner to soak into the wood. Soaking time is usually no more than 10 minutes, but check the product instructions.

Step 11

Rinse the deck thoroughly with a garden hose.

Step 12

Wash equipment with soapy water. Rinse plastic sheeting with water and remove.

Step 13

Allow deck to dry at least two days before applying a sealer.

Blue Star Carpentry has been specializing in custom decks for over a decade. When you sit outside with your family around you, enjoying the most beautiful days of the year, we want you to be on the deck of your dreams. For more info on

deck builder long island

visit http://bluestarcarpentry.com/

Article Source:

eArticlesOnline.com }



Click Here To Know More About:

Choosing the Best Options for Your New Garage Door

by

Anne Richards

When it comes to garage doors, there are as many options, styles and price ranges as there are home designs, so it can be somewhat difficult to decide on the best option for your home. First, it will help to understand how garage door manufacturers and resellers classify their products and which options are available within each category.

By doing a little homework upfront, you can save yourself time, stay within your budget, and be sure you are getting the best quality garage door to match your home. A range of options are available when purchasing a new garage doors, including materials, design, panel style and more. Prices can range from $500 for a very basic aluminum door, up to $10,000 for a craftsman’s work of art. Here are some basic classifications that will help you narrow down your options before you start shopping.

YouTube Preview Image

Stock Doors: A basic garage door is one that has no significant design, and does not come with glass. For each upgrade, the price of the door will go up, so it is important to be aware of the additional costs you will incur for each level of customization. Choosing a material (wood, steel, aluminum or fiberglass) will probably be your first decision, followed by material quality, insulation, panel design and other upgrades, like windows. However you choose to customize a stock door, the installation will probably be the same price (about $100), but installing a door with windows may cost slightly more.

Semi-Custom: Some homeowners will opt to customize garage doors to better suit their home. Customers in this range will have a broader selection of panel styles, unique glass inserts and other design enhancements. There are also more types of wood available in semi-custom doors, including hemlock, cedar and mahogany. Steel doors within this range will most likely include insulation, which is sandwiched between a steel front and fiberglass inner shell. They will also be coated with a durable, baked-on primer which can be painted. Semi-custom doors allow homeowners to get a bit more creative with the design and color of their doors, which can greatly enhance a home’s overall look.

Custom: These are the most high-end of all garage doors, and can be completely customized with specific panel designs, colors, finishes and materials, all with the goal of making the garage door an integral part of the home’s architectural design. Many manufacturers refer to this level of quality as their “carriage house collection”. Made of the highest quality woods, these doors generally carry a longer warranty, and may cost upwards of $3,000 each. They can be custom-made from architectural plans, which are submitted to the manufacturer. Most of the time, a finished custom door can be delivered within three weeks, but some highly specialized doors will take longer. Many manufacturers allow you to take an online tour of their custom garage doors styles, in a “virtual showroom” format. This is a great way to get ideas and make decisions about your desired level of customization and type of materials.

For more information on affordable

garage doors

, garage door repair, and

garage door openers

, visit http://www.mesagaragedoors.com.

Article Source:

eArticlesOnline.com

}